top of page

This beautiful reproduction poster has been re-mastered from a 1904 advertising poster for the Northern Pacific Railroad’s service to Yellowstone National Park.

 

The vibrant colors and detail of this classic image have been painstakingly brought back to life to preserve a great piece of history.

 

The high-resolution image is printed on heavy archival photo paper, on a large-format, professional giclée process printer. The poster is shipped in a rigid cardboard tube, and is ready for framing.

 

The 24"x36" format is an excellent image size that looks great as a stand-alone piece of art, or as a grouped visual statement. These posters require no cutting, trimming, or custom framing, and a wide variety of these frames are readily available at your local craft or hobby retailer, and online.

 

A great vintage print for your home, shop, or business!

 

RAILROAD SERVICE TO YELLOWSTONE NATIONAL PARK

 

In 1872, Yellowstone became the United State’s first national park. Initially, visitation to the park was minimal- only about 1,000 visitors annually- due to its remote location, difficult access, and primitive accommodations.

 

Very early on, this access was dramatically improved as railroads viewed rail service to Yellowstone as a boon for their development. In 1882, the Northern Pacific Railroad reached Livingston, Montana, and soon they added a spur to Cinnabar, close to the north end of the park. By 1902, their trains reached Gardiner, adjacent to the north entrance to the park. Tourists boarded stagecoaches in Gardiner to continue their trip through the park. In 1898, the Burlington reached Cody, Wyoming. Stage service through the park was available from that location as well.

 

Even before that, the Union Pacific Railroad had extended its service through its subsidiary, the Utah and Northern Railway, reaching Beaver, Idaho in 1879 and Monida, on the Montana-Idaho border, in March of 1880. (This line was extended to Garrison, Montana by 1883.) Stagecoach service was provided from train stops at Beaver, Spencer, and Monida east to the park. The 85 miles from Monida to the west boundary of the park was an arduous trip, requiring four changes of horses. Once train service was available directly to Gardiner, this trip became less attractive when such a convenient alternative was available.

 

UNION PACIFIC AT THE WEST ENTRANCE

 

In 1905, E. H. Harriman, president of the Union Pacific Railroad, traveled through Yellowstone National Park to meet with officials from the Northern Pacific Railroad. They likely took the main tour loop through the park, staying at the grand hotels throughout the park, and discussed the growing needs of the increasing numbers of park visitors. Following his visit to the park, Harriman ordered the construction of a rail line from St. Anthony, Idaho (the terminus of the Union Pacific Line at that time) to the park’s western border in Montana. This line was managed by the Oregon Short Line, a subsidiary of the Union Pacific Railroad.

 

Work on grading and laying rails began late in 1905. By January of 1906, the entire alignment for the railroad from St. Anthony to West Yellowstone was established. Shortly thereafter, the site of the station grounds for the rail terminal was proposed for a location in the Madison Forest Reserve (now the Gallatin National Forest), next to Yellowstone National Park’s western boundary.

 

The railroad workers had completed over half of the 70 miles of rail line between St. Anthony and West Yellowstone by June of 1907. Preparation of the rail bed was done from both ends of the line. Ties and rails were laid only from the south end since the train coming from St. Anthony was used to deliver these items. Construction of the line in the Island Park area and over Reas Pass was especially difficult due to the rugged, isolated conditions.

 

The final line was laid next to the western park boundary on November 12, 1907. Passenger service did not start to West Yellowstone, then known as Riverside and later as Yellowstone, until the following spring. The section of rail line between Ashton and West Yellowstone was never kept open in the winter due to the extreme snow conditions.

 

The first passenger train arrived in West Yellowstone (Riverside) on June 11, 1908. A wooden depot and several businesses greeted the first visitors. Now that the rail line was complete, the Oregon Short Line turned its attention to constructing facilities for train operations and passenger care at its new terminus.

 

Train service to West Yellowstone was limited to the months of June to September as the lines between Ashton and West Yellowstone were not kept open during the winter due to the heavy snows. Each year, staring in March, the Spring Campaign was underway to clear the snow from the tracks. Engines equipped with snow blowers and plows were used for this monumental effort.

 

In 1907, the year before passenger service was initiated to West Yellowstone, 4,105 people entered the park through the west entrance. In 1908, the year train service began, this number reached 7,172, and in 1912, it was 10,783. In 1915, 32,551 people came through the west entrance, with 29,706 of them arriving by rail. World War I impacted park visitation, with 1919 figures for the west gate totaling 23,558, and only 8,897 of them by rail.

 

The Northern Pacific Railroad’s Yellowstone division was headquartered in Glendive, Montana. The Yellowstone Division's main routes were from Mandan, North Dakota, to Billings, Montana, and from Billings to Livingston, Montana. The division encompassed 875 route miles; 546 in main line and 328 in branches.

 

OTHER RAILROADS

 

Other railroads also provided train service to Yellowstone National Park. The Chicago, Burlington & Pacific Railroad offered service to the park through the East Entrance in 1912. Starting in 1922, the Chicago & Northwestern Railway offered travel to Lander, Wyoming, and from there on to Yellowstone via autobus through the south entrance. The long drive from Lander to the park made this route less popular than many of the others. The Chicago, Milwaukee & St Paul Railway offered service through the West Gate from Three Forks, MT in 1926, and from Gallatin Gateway in 1927. The Northern Pacific also offered service through Red Lodge Montana in 1937, and through Bozeman in 1927. The Union Pacific offered service from Victor, Idaho through the South Entrance in 1929. But as soon as the Union Pacific line was opened to West Yellowstone in 1907, it was the most popular access point, garnering over 50% of all train passengers coming to the park.

Yellowstone National Park 1904 Map Northern Pacific RR Vintage Poster - 9

$34.95Price
Color: Earth

    These are simply the best posters available! You will be thrilled with the image quality, vivid colors, fine paper, and unique subjects.
     
    Our posters are sized for standard off-the-shelf frames, with no custom framing required, providing huge cost savings!

    Related Products